Conducted Rx Sensitivity And Tx Power; Conducted Receive Sensitivity - Huawei ME936 Hardware Manual

HUAWEI ME936 LTE M.2 Module
Hardware Guide

4.4 Conducted Rx Sensitivity and Tx Power

4.4.1 Conducted Receive Sensitivity

The conducted receive sensitivity is a key parameter that indicates the receiver
performance of ME936.
The 3GPP Protocol Claim column in Table 4-2 lists the required minimum values,
and the Test Value column lists the tested values of ME936.
Table 4-2 ME936 conducted Rx sensitivity
Band
GSM 850
GSM 900
DCS 1800
PCS 1900
WCDMA B1 Main Rx
WCDMA B2 Main Rx
WCDMA B4 Main Rx
WCDMA B5 Main Rx
WCDMA B8 Main Rx
LTE B1 RX
LTE B2 RX
LTE B3 RX
LTE B4 RX
LTE B5 RX
LTE B7 RX
LTE B8 RX
LTE B13 RX
LTE B17 RX
LTE B20 RX
Issue 03 (2017-12-11)
1. Sensitivity of WCDMA and GSM are tested in the main port.
2. LTE sensitivity is tested in SIMO (Main + AUX), BW=10 MHz.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Typical Value Note
–109.5
BER Class II < 2.44%
–109.5
BER Class II < 2.44%
–110
BER Class II < 2.44%
–109
BER Class II < 2.44%
–110.5
BER < 0.1%
–110
BER < 0.1%
–110.5
BER < 0.1%
–110.5
BER < 0.1%
–111
BER < 0.1%
–101 Throughput ≥ 95%, 10 MHz Bandwidth
–101.5 Throughput ≥ 95%, 10 MHz Bandwidth
–101 Throughput ≥ 95%, 10 MHz Bandwidth
–101 Throughput ≥ 95%, 10 MHz Bandwidth
–101 Throughput ≥ 95%, 10 MHz Bandwidth
–99.5 Throughput ≥ 95%, 10 MHz Bandwidth
–102 Throughput ≥ 95%, 10 MHz Bandwidth
–100 Throughput ≥ 95%, 10 MHz Bandwidth
–102 Throughput ≥ 95%, 10 MHz Bandwidth
–101.5 Throughput ≥ 95%, 10 MHz Bandwidth
RF Specifications
48