Huawei ME936 Hardware Manual page 52

HUAWEI ME936 LTE M.2 Module
Hardware Guide


Polarization
The polarization of an antenna is the orientation of the electric field vector that rotates
with time in the direction of maximum radiation.
The linear polarization is recommended for the antenna of ME936.
Radiation Pattern
The radiation pattern of an antenna reflects the radiation features of the antenna in
the remote field region. The radiation pattern of an antenna commonly describes the
power or field strength of the radiated electromagnetic waves in various directions
from the antenna. The power or field strength varies with the angular coordinates (θ
and φ), but is independent of the radial coordinates.
The radiation pattern of half wave dipole antennas is omnidirectional in the horizontal
plane, and the incident waves of base stations are often in the horizontal plane. For
this reason, the receiving performance is optimal.
The following radiation patterns are recommended for the antenna of ME936.
Primaryantenna: omnidirectional.
Secondary antenna: omnidirectional (Upper Hem Partial Radiated Power ≥ 40% @
1574.42 MHz–1605.89 MHz)
In addition, the secondary antenna's pattern should be complementary with the
primary antenna's pattern.
Gain and Directivity
The radiation pattern of an antenna represents the field strength of the radiated
electromagnetic waves in all directions, but not the power density that the antenna
radiates in the specific direction. The directivity of an antenna, however, measures
the power density that the antenna radiates.
Gain, as another important parameter of antennas, correlates closely to the
directivity. The gain of an antenna takes both the directivity and the efficiency of the
antenna into account. The appropriate antenna gain prolongs the service life of
relevant batteries.
The following antenna gain is recommended for ME936.


ECC of the antenna
ECC is short for Envelope Correlation Coefficient. It is the cross-correlation value of
the complex patterns of the master and diversity antenna. It indicates how similar the
magnitude and the phase patterns of the two antennas are. If two antennas have no
similarity, the ECC should be zero. Actually, the less ECC, the better diversity
performance.
Issue 03 (2017-12-11)
Isolation between the primary and secondary antennas ≤ –12 dB(≤ –15 dB @
1574.42 MHz–1605.89 MHz)
Isolation between the primary (secondary) antenna and the Wi-Fi antenna ≤ –15
dB
Gain of the master antenna ≤ 2.5 dBi
Gain of the secondary antenna ≤ 2.5 dBi
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
RF Specifications
52