Conducted Rf Measurement; Test Environment; Test Standards; Conducted Rx Sensitivity And Tx Power - Huawei ME909 Series Hardware Manual

HUAWEI ME909 Series Mini PCIe Module
Hardware Guide
Operating Band
LTE Band V
LTE Band VIII
LTE Band VII
LTE Band XX
GPS L1
GLONASS

4.3 Conducted RF Measurement

4.3.1 Test Environment

Test instrument
Power supply
RF cable for testing

4.3.2 Test Standards

Huawei modules meet 3GPP TS 51.010-1, 3GPP TS 34.121-1 and 3GPP TS
36.521-1 test standards. Each module passes strict tests at the factory and thus the
quality of the modules is guaranteed.

4.4 Conducted Rx Sensitivity and Tx Power

4.4.1 Conducted Receive Sensitivity

The conducted receive sensitivity is a key parameter that indicates the receiver
performance of ME909u-521 module. The conducted receive sensitivity refers to the
weakest signal that the module at the antenna port can receive. The BER must meet
the 3GPP protocol requirements in the case of the minimum signal.
Issue 0.1 (2013-06-09)
Tx
824 MHz–849 MHz
880 MHz–915 MHz
2500 MHz–2570 MHz
832 MHz–862 MHz
-
-
R&S CMU200, R&S CMW500 ,Agilent E5515C
Keithley 2303, Agilent 66319
L08-C014-350 of DRAKA COMTEQ or Rosenberger
Cable length: 29 cm
 The compensation for different frequency bands relates to the cable and the test
environment.
The instrument compensation needs to be set according to the actual cable conditions.

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
RF Specifications
Rx
869 MHz–894 MHz
925 MHz–960 MHz
2620 MHz–2690 MHz
791 MHz–821 MHz
1574.42 MHz–1576.42 MHz
1597.55 MHz–1605.89 MHz
26