System memory configuration guidelines
•
To ensure data integrity, use only Acer-approved 240-pin, DDR3
1333 MHz ECC unbuffered DIMM (UDIMM) or registered DIMM
(RDIMM) modules.
•
If you are using a single-processor configuration, you should install
the memory module into DIMM A1 to DIMM C2 slots.
The DIMM D1 to DIMM F2 slots are enabled when a second
processor is installed on the mainboard.
•
DIMM modules of the same type, size, and manufacturer must be
installed in the same colored DIMM slots.
•
Follow the population sequence illustrated in the next section
when installing a memory module.
61