Installing The Tpm Module - Acer Altos R520 M2 Series User Manual

Installing the TPM module

The optional TPM module allows system administrators to enhance the
security of the Altos R520 M2 system.
To install the TPM module:
1 Perform the pre-installation instructions described on page 35.
2 Locate the TPM module connector. If necessary, remove any boards
or cables that prevent access to it.
3 Remove the TPM module from its protective packaging, handling
it by the edges.
4 Install the TPM module.
Insert the TPM module into the TPM module connector.
5 Observe the post-installation instructions described on page 42.
6 Enable the TPM in BIOS. Refer to "Security menu" on page 107 for
more information.
73