Power Up The System - Cisco Unified 500 Series Getting Started

Warning Do not work on the system or connect or disconnect cables during periods of lightning
activity. Statement 1001
To connect the power supply to the Cisco Unified 500 Series, perform the following steps:
Step 1 Connect the AC power cord to the the power supply.
Step 2 Connect the power interface cable to the power connector port on the back of the
Cisco Unified 500 Series.
7

Power Up the System

To power up the Cisco Unified 500 Series, perform the following steps:
Step 1 Verify that the AC power cord is connected to the power supply.
Step 2 There is no external Power On/Off switch on the power supply. To power up the power supply
and the Cisco Unified 500 Series, connect the power cord plug to a grounded AC outlet.
29