Cisco Unified 500 Series Getting Started page 47

Step 1 Go to the Download Software site at
http://www.cisco.com/cgi-bin/tablebuild.pl/CME-Locale. You must have an account on
Cisco.com to access the Software Center. If you do not have an account or have forgotten your
username or password, click Cancel at the login dialog box and follow the instructions that
appear.
Step 2 Select the TAR file for the locale you want to install. Each TAR file contains locale files for a
specific language and country and uses the following naming convention:
CME-locale-language_country-CMEversion
For example, CME-locale-de_DE-4.0.1-1.0 is German for Germany for Cisco Unified
CME 4.0(1).
Step 3 Download the TAR file to the PC on which the Cisco Configuration Assistant is installed. Each
file contains all the firmware required for all phone types supported by that version of
Cisco Unified CME.
Step 4 Extract the files to the \Program Files\Cisco Configuration Assistant\appdata\phoneload
folder on the PC or laptop on which the Cisco Configuration Assistant is installed.
Launch the Cisco Configuration Assistant. For information, see the Getting Started with
Step 5
Cisco Configuration Assistant document at
CD-ROM that shipped with the product.
Step 6 Using a RJ-45 to RJ-45 Ethernet cable, connect the Ethernet port of the PC on which the Cisco
Configuration Assistant is installed to a PoE port on the front panel of the Cisco Unified
500 Series.
Step 7 Use the Cisco Configuration Assistant to upload files from the PC to flash memory of the
Cisco Unified 500 Series and to configure localization support for Cisco Unified CME. For
information, see online help.
Download Language for Voice-Mail Prompts from Cisco.com
Before using the Cisco Configuration Assistant to configure localization support for Cisco Unity
Express on a Cisco Unified 500 Series, you must download a language pack from Cisco.com.
Note For a list of supported languages, see the appropriate Cisco Unified 500 Series Matrix at
http://www.cisco.com/en/US/products/ps7293/prod_installation_guides_list.html.
http://www.cisco.com/go/configassist or on the
47