Sunbeam BARISTA MAX EM5300 User Manual page 37

Troubleshooting Guide - Grinder
PROBLEM
Espresso is
under extracted
even with a fine
coffee grind
Grind Setting
cannot be
adjusted
Bean Hopper
cannot be
locked into
position
Top Burr does
not sit in the
Grinder Collar
correctly
Possible Cause
Not enough coffee grinds used. Dose more coffee grinds.
Beans are too old.
Bottom Burrs needs adjusting. See Adjusting the Bottom Burr
The Bean Hopper is not
seated correctly.
Coffee beans or grinds are
caught around the Top Burr
or Grinder Collar.
Grinder Collar not aligned to
the Top Cover.
Coffee beans or grinds are
caught in the Top Burr or
Grinder Collar.
The Top Burr is not seated
correctly.
Grinder Collar not aligned to
the Top Cover.
Coffee beans or grinds are
caught around & under the
Top Burr
The Top Burr is not seated
correctly.
What To Do
Use freshly roasted beans. Old coffee
beans, no matter the Grind Setting, will
have a fast extraction and will produce
an under extracted tasting espresso.
section, page 29.
Remove the Bean Hopper & replace.
See Replace Bean Hopper section,
page 27.
Remove the Bean Hopper & Top Burr.
Use the Cleaning Brush or Vacuum
Cleaner as necessary to clear loose
coffee beans or grinds. See Replace
Bean Hopper section, page 27.
Ensure the dot on the Top Cover aligns
with the dot on the Grinder Collar.
See Replace Top Burr section, page 29
Remove the Bean Hopper & Top Burr.
Use the Cleaning Brush or Vacuum
Cleaner as necessary to clear loose
coffee beans or grinds. See Replace
Bean Hopper section, page 27.
Make sure the Top Burr is correctly
aligned and that the two handles are
placed one on each side.
See Replace Top Burr section, page 29.
Ensure the dot on the Top Cover aligns
with the dot on the Grinder Collar.
See Replace Top Burr section, page 29.
Remove the Top Burr and replace the
Bean Hopper. Hold the Bean Hopper
down with your hand, do not turn.
Insert the Group Handle into the
Grinding Cradle and push down to
activate the Grinder. The coffee grinds
will fall out the Grind Outlet.
Make sure the Top Burr is correctly
aligned and that the two handles are
placed one on each side.
See Replace Top Burr section, page 29
37