Sunbeam BARISTA MAX EM5300 User Manual page 26

Espresso machine with integrated grinder
Table of Contents

Advertisement

Care & Cleaning - Espresso Machine
Cleaning Steam Wand
• Every time
- After texturing milk purge the Steam
Wand by turning the DIAL to HOT WATER
for just 1-2 seconds.
- Wipe the Steam Wand with a damp cloth.
(See Coffee Making Guide page 13)
• 2-3 Months
- Soak the Steam Wand overnight in
the Milk Jug with warm water &
one Sunbeam Cleaning Tablet.
- In the morning remove the Jug and rinse
ensuring that all traces of the solution
have been removed.
- Wipe Steam Wand with a damp cloth
ensuring that all traces of the cleaning
tablet have been removed.
- Run Hot Water through the Steam Wand
for 40 seconds.
• Unblocking Steam Wand
If the Steam Wand Tip becomes clogged
with milk residue:
- Insert the thicker 'STEAM' Cleaning Pin
up the Steam Wand Tip hole and remove.
INSERT
- Run Hot Water through the Steam Wand
for 40 seconds.
• Steam Wand Remains Blocked:
- Unscrew the Steam Wand Tip and soak
overnight in the Milk Jug with warm
water & one Sunbeam Cleaning Tablet.
UNSCREW
26
STEAM
- In the morning rinse the Jug & Steam
Wand Tip under running water ensuring
all traces of the cleaning tablet have
been removed.
- Use the thicker 'Steam' Cleaning Pin to
clean the Steam Wand Tip.
- Ensure red O-ring is present & undamaged.
- Screw the Steam Wand Tip back into the
Steam Wand Arm.
- Run Hot Water through the Steam Wand
for 40 seconds.
Cleaning Filter Baskets
• 2-3 Months
- Soak the Filter Basket(s) overnight in
the Milk Jug with warm water &
one Sunbeam Cleaning Tablet.
- In the morning rinse the Jug & Filter
Basket(s) under running water ensuring
all traces of the cleaning tablet have
been removed.
- Place a Filter Basket into Group Handle
(without coffee grinds) and insert into
Group Head.
- Press the ONE CUP BUTTON.
- Allow water to run through until it stops.
• Unblocking Dual Wall Filter Baskets
If the Dual Wall Filter Basket (not supplied
with the Barista Max) becomes clogged
with coffee grinds:
- Insert the thinner 'FILTER' Cleaning Pin
in the exit hole and remove.
INSERT
- Place Filter Basket into Group Handle
(without coffee grinds) and insert into
Group Head.
- Press the ONE CUP BUTTON.
- Allow water to run through until it stops.
- Repeat if needed.

Advertisement

Table of Contents
loading

Table of Contents