Sony RM-280 Operation Manual page 78

Item Item name
number
26 ASM POST
(ASSEMBLE POSTROLL REC)
27 XDC EDIT
(XDCAM ASM EDIT MODE)
28 VAR RANG
(VAR RANG SPEED RANGE SETTING)
40 VERSION
(VERSION DISPLAY)
41 RST MENU
(RESET MENU DATA)
The speed assigned to the search dial
78
Setup Menu
Settings
Sets the postroll recording time. To set the postroll time to 0 frames,
set it to –4FRM. If the postroll time is still not set to 0 frames, adjust
the value around –4FRM for fine adjustment.
[+3SEC], 2S, 1S, +1FRM to –9FRM
Note
This menu is effective only when an XDCAM device is connected.
(The postroll time is fixed to 3 seconds when a VTR is connected.)
Sets the assemble editing method when an XDCAM device is
connected.
[NORMAL]: Performs normal assemble editing.
NEW CLIP: Creates the new clip after the last clip of the XDCAM
device connected as the recorder, simply by setting the IN and
OUT point of the player.
1) Supported devices: PDW-1500, PDW-F75, PDW-HR1, PDW-HR1/MK1,
Note
When any device other than an XDCAM device is connected, the
unit operates as NORMAL, even if NEW CLIP is set.
Assigns the search speed in the variable mode to the search dial.
When NORMAL is set, the search speed can be changed when the
VAR button is held down.
[NORMAL], –1 to +2, –1 to +1, –05 to +05
For details on the setting and assignable speeds, see "The speed
assigned to the search dial" (see page 78).
Note
When the setting is set to other than NORMAL, the search speed
can not be changed, even if the VAR button is held down.
Displays the software version of the unit.
Resets all the settings of the setup menu to factory setting.
RESET ON: Resets all the settings.
[OFF]: Doesn't reset.
Example) The search speed when NORMAL is set in menu item 28
–0.2 (–0.06) 7
–0.5 (–0.12) 6
JOG
–1 (–0.2) 5
–1 (–0.34) 4
–1 (–0.5) 3
–1 (–0.74) 2
–1 (–1) 1
Search dial
PDW-HD1500, PDW-F1600, PDW-HD1200
8 +0.2 (+0.06)
9 +0.5 (+0.12)
0 +1 (+0.2)
qa +1.5 (+0.34)
qs +2 (+0.5)
qd +2 (+0.74)
qf +2 (+1)
1)
Units: Speed (times)