Sony RM-280 Operation Manual page 69

XDCAM mode (when the PREVIEW button
is pressed simultaneously)
Key Display Function
PF1 – No function.
PF2 – No function.
PF3 – No function.
PF4 – No function.
PF5 – No function.
PF6 – No function.
PF7 PUSH SEL Turn the multi control knob of
(S.SEL) the player/recorder in the
KNOB REV reverse direction.
PF8 PUSH SEL Turn the multi control knob of
(S.SEL) the player/recorder in the
KNOB FWD forward direction.
PF9 – No function.
PF10 F1 FunctionMenu F1
PF11 F2 FunctionMenu F2
PF12 F3 FunctionMenu F3
PF13 F4 FunctionMenu F4
PF14 F5 FunctionMenu F5
PF15 F6 FunctionMenu F6
DSR-DR1000A Replay Mode
Key Display Function
PF1 REVIEW Starts playback a certain
amount of time (the preroll time)
ahead of the marked cue point.
(Set the preroll time with the
PREROLL 3, PREROLL 5, or
PREROLL 7 button, and set the
playback speed with the VAR
0.2, VAR 0.5, or VAR 0.8
button.)
PF2 MARK CUE Sets the cue point.
PF3 STOP (During playback) Stops the
playback.
(During stop mode) Enters E-E
mode.
PF4 Jumps to the point that is the
–
RVW
length of the preroll time ahead
of the previous cue point.
PF5 10 STEP
Press the RVW+ or RVW
button simultaneously with this
button to jump to the point that
is the length of the preroll time
ahead of the tenth cue point
before or after the current
location.
PF6 RVW+ Jumps to the point that is the
length of the preroll time ahead
of the following cue point.
PF7 – No function.
Key Display
PF8 –
PF9 –
PF10 T1
PF11 T2
PF12 T3
PF13 S1
PF14 S2
PF15 S3
PREVIEW PLAY
–
Function
No function.
No function.
To start playback three seconds
ahead of the marked cue point,
press this button so it lights up.
To start playback five seconds
ahead of the marked cue point,
press this button so it lights up.
To start playback seven
seconds ahead of the marked
cue point, press so it lights up.
To start playback at the speed
that you set on the setup menu
item 23 RPLY SPD, press this
button so it lights up.
To start playback at the speed
that you set on the setup menu
item 23 RPLY SPD, press this
button so it lights up.
To start playback at the speed
that you set on the setup menu
item 23 RPLY SPD, press this
button so it lights up.
To start playback, press this
button so it lights up.
Using as a Remote Controller
69