Technical Data - ABB REF615 ANSI 5.0 FP1 Product Manual

Feeder protection and control
Table of Contents

Advertisement

20. Technical data

Table 6. Dimensions
Description
Width
Height
Depth
Weight
Table 7. Power supply
Description
Nominal auxiliary voltage U
n
Maximum interruption time in the auxiliary
DC voltage without resetting the relay
Auxiliary voltage variation
Start-up threshold
Burden of auxiliary voltage supply under
quiescent (P
)/operating condition
q
Ripple in the DC auxiliary voltage
Fuse type
Table 8. Energizing inputs
Description
Rated frequency
Current inputs
Rated current, I
Thermal withstand capability:
- Continuously
- For 1 s
Dynamic current withstand:
- Half-wave value
Input impedance
Voltage input
Rated voltage
Voltage withstand:
- Continuous
- For 10 s
Burden at rated voltage
1) Ordering option for ground current input
2) Ground current and/or phase current
Table 9. Energizing input (sensors)
Description
Current sensor input
Voltage sensor input
1) Equals the current range of 40...4000 A with a 80 A, 3 mV/Hz Rogowski
2) Depending on the used nominal current (hardware gain)
3) This range is covered (up to 2*rated) with sensor division ratio of 10 000:1
Value
frame
case
frame
case
case
complete protection relay
plug-in unit only
Type 1
100, 110, 120, 220, 240 V AC, 50 and 60 Hz
48, 60, 110, 125, 220, 250 V DC
38...110% of Un (38...264 V AC)
80...120% of Un (38.4...300 V DC)
DC <13.0 W (nominal)/<18.0 W (max.)
AC <16.0 W (nominal)/<21.0 W (max.)
Value
50/60 Hz ± 5 Hz
0.2/1 A
n
4 A
100 A
250 A
<100 mΩ
60...210 V AC
240 V AC
360 V AC
<0.05 VA
Rated current voltage (in secondary slide)
Continuous voltage withstand
Input impedance at 50/60 Hz
Rated voltage
Continuous voltage withstand
Input impedance at 50/60 Hz
177 mm
164 mm
177 mm (4U)
160 mm
201 mm (153 + 48mm)
4.1 kg
2.1 kg
Type 2
24, 30, 48, 60 V DC
50 ms at U
n
50...120% of Un (12...72 V DC)
19.2 V DC (24 V DC × 80%)
DC <13.0 W (nominal)/<18.0 W (max.)
Max 15% of the DC value (at frequency of 100 Hz)
T4A/250 V
1)
Value
75 mV...9000 mV
125 V
2...3 MΩ
6 kV...30 kV3)
50 V
3 MΩ
1/5 A
2)
20 A
500 A
1250 A
<20 mΩ
1)
2)
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents