ABB REF615 ANSI 5.0 FP1 Product Manual page 37

—
Table 14. Double-pole power output relays with TCS function
Description
Rated voltage
Continuous contact carry
Make and carry for 3.0 s
Make and carry for 0.5 s
Breaking capacity when the control-circuit time constant L/R<40 ms, at
48/110/220 V DC (two contacts connected in series)
Minimum contact load
Trip-circuit supervision (TCS):
• Control voltage range
• Current drain through the supervision circuit
• Minimum voltage over the TCS contact
—
Table 15. Single-pole power output relays
Description
Rated voltage
Continuous contact carry
Make and carry for 3.0 s
Make and carry for 0.5 s
Breaking capacity when the control-circuit time constant L/R<40 ms, at
48/110/220 V DC
Minimum contact load
—
Table 16. High-speed output HSO with BIO0007
Description
Rated voltage
Continuous contact carry
Make and carry for 3.0 s
Make and carry for 0.5 s
Breaking capacity when the control-circuit time constant L/R <40 ms, at
48/110/220 V DC
Operate time
Reset
—
Table 17. Front port Ethernet interfaces
Ethernet interface
Front
—
Table 18. Station communication link, fiber optic
Connector Fiber type
MM 62.5/125 or 50/125 μm
LC glass fiber core
MM 62.5/125 or 50/125 μm
ST glass fiber core
1) (MM) multi-mode fiber, (SM) single-mode fiber
2) Maximum length depends on the cable attenuation and quality, the amount of splices and connectors in the path.
3) Maximum allowed attenuation caused by connectors and cable together
Protocol
TCP/IP protocol
1) Wave length
1300 nm
820...900 nm
Value
250 V AC/DC
8 A
15 A
30 A
5 A/3 A/1 A
100 mA at 24 V AC/DC
20...250 V AC/DC
~1.5 mA
20 V AC/DC (15...20 V)
Value
250 V AC/DC
8 A
15 A
30 A
5 A/3 A/1 A
100 mA at 24 V AC/DC
Value
250 V AC/DC
6 A
15 A
30 A
5 A/3 A/1 A
<1 ms
<20 ms, resistive load
Cable
Standard Ethernet CAT 5 cable with
RJ-45 connector
Typical max.
length 2)
2 km
1 km
Data transfer rate
10 MBits/s
Permitted path attenuation
<8 dB
<11 dB
37
3)