Rack Mounting The 3810M Switch In A 4-Post Rack - HP Aruba 3810M Series Installation And Getting Started Manual

Rack Mounting the 3810M switch in a 4-post rack

1. Using the (J9583A) X410 E-Series 1U Universal Rack Mounting Kit, use a #1 Phillips
(cross-head) screwdriver and attach the slider brackets to the switch with the included 8-mm
M4 screws.
Figure 17 Attaching the rail kit slider brackets to the switch
2. Install the rails in the rack.
Figure 18 Installing the rails
3. Installing the switch into the rails.
Installation Procedures 39