HP Aruba 3810M Series Installation And Getting Started Manual page 74

Table 27 Stacked Switch and Stacking Module LED Error Indicators (continued)
Global Status
LED
Slow Flash
Orange
Slow Flash
Orange
Slow Flash
Orange
Solid Green
Solid Green
Table 28 Diagnostic Tips for Stack Errors:
Tip
1 Stacking is disabled on the switch.
74 Troubleshooting
Chassis Status Mode/Status
Back LED Usr
Slow Flash Solid Green
Orange
Slow Flash Solid Green
Orange
Slow Flash Solid Green
Orange
Off Solid Green
Off Solid Green
Problem
Back side of chassis
Port LED
Stacking
Module
Slow Flash Slow Flash
Green - Orange
Member
Fast flash
Green -
Commander
Solid Green -
Member with
good stacking
connection
Slow Flash
Orange -
Member with
poor stacking
connection
Off Slow Flash
Orange
Slow Flash Slow Flash
Green - Orange, if the
Member link is broken.
Fast Flash
Green -
Commander
Slow Flash
Orange -
Member in
other fragment
Slow Flash Solid Green
Green -
Member
Fast Flash
Green -
Commander
Slow Flash Solid Green
Green -
Member
Fast Flash
Green -
Commander
1. Connect a console cable to the switch and establish
a console session, as described in
Connect a Management console
2. From the CLI config context, enter the command
stacking enable.
3. Recheck the switch LEDs:
Stacking Port LED back to Solid green.
Port LED in user mode are all in green color.
See
Diag
Tips
Stacking Port
Slow Flash 3
Orange
Off 4
Slow Flash 5 & 6
Orange, if the
link is broken.
Solid Green 7
Solid Green 8
Solution
10. (Optional)