Electrolux TW L4 E User Manual page 31

SETTING A PROGRAMME
Use the programme dial to set the pro-
gramme. The possible time to complete the
programme come into view on the display.
The drying time you see is related to
the load of 5 kg for cotton and jeans
programmes. For the other pro-
grammes the drying time is related to
the recommended loads. The drying
time of the cotton and jeans pro-
grammes with the load more than 5 kg
is longer.
SPECIAL FUNCTIONS
Together with the programme you can set
1 or more special functions.
To activate or deactivate the function push
the applicable push button.
When the function is activated the LED
above the push button comes into the view.
THE ANTICREASE (KNITTERSCHUTZ)
FUNCTION
Extends anticrease phase (30 minutes) at
the end of the drying cycle to 90 minutes.
This function prevents laundry from crea-
ses. Laundry can be removed during the
anticrease phase.
THE BUZZER (SIGNAL) FUNCTION
When the buzzer function is activated you
can hear the buzzer at the:
• cycle end
• anti-crease phase start and end
• cycle interruption
The buzzer function is by default always on.
You can use this function to activate or de-
activate the sound.
THE TIME DRYING (ZEITWAHL)
FUNCTION
Operates only with the Time (Zeitprogramm)
programme. Lets the user to set special
time of drying programme from minimum
10 min. to maximum of 2 hours (in 10 min.
steps).
THE DELAY START (ZEITVORWAHL)
FUNCTION
Let to delay the start of a drying pro-
gramme from minimum of 30 minutes
to maximum of 20 hours.
1. Set the drying programme and func-
tions.
2. Push the Delay Start (Zeitvorwahl) but-
ton again and again until the necessary
time of the delay come into the view on
the display (e.g.
has to start after 12 hours.)
3. To activate the Delay Start (Zeitvorwahl)
function, push the Start/Pause button.
The time to start decreases on the dis-
play.
STARTING A PROGRAMME
To activate the programme push the Start/
Pause button. The LED above the push
button changes the color to red.
CHANGE A PROGRAMME
To change a programme, turn the pro-
gramme selector to Stop and then set the
programme again.
electrolux 31
if the programme