Lcd Display Description - TES -1353S Instruction Manual

INTEG
TIME
12. button :
Select the default measurement time : Press this button one time enter to
integrating measurement time select mode, use "
the measurement time,
→30sec→1min→5min →8min→10min→15min→30min→1hour→8hour→24hour.
Setting to desired measurement time : Press this button 2 seconds enter to other
desired integrating measurement time setting mode, the setting range from 1
second to 100 hours.
13. micro SD CARD 4GB.
14. CAL potentiometer: Calibration potentiometer for level adjustment.
15. Micro-USB: USB input/output connector for input of control signals and output of
16. ALARM output: Sound level alarm output.
17. Thermal printer output jack: Connection the PROVA 300XP printer.
18. AC/DC output socket: AC output signal with frequency weighting.
19. External DC power supply socket: Type 1.3 coaxial power connector; center
20. Tripod mounting: ¼" - 20 UNC Female thread.
21. Battery cover.

6. LCD DISPLAY DESCRIPTION

new manual setting time→ --:--:--
measurement data.
DC output signal corresponding to sound level.
negative, nominal 6V DC.
10
" buttons to select
→1sec→3sec→10sec