Welch Allyn Acuity Directions For Use Manual page 2

ii
© 2011 Welch Allyn. All rights are reserved. To support the intended use of the product described in this publication,
the purchaser of the product is permitted to copy this publication, for internal distribution only, from the media
provided by Welch Allyn. No other use, reproduction, or distribution of this publication, or any part of it, is permitted
without written permission from Welch Allyn.
Welch Allyn FOSS. This product may contain software known as "free" or "open source" software (FOSS). Welch
Allyn uses and supports the use of FOSS. We believe that FOSS makes our products more robust and secure, and
gives us and our customers greater flexibility. To learn more about FOSS that may be used in this product, please visit
our FOSS website at www.welchallyn.com/opensource.
Welch Allyn assumes no responsibility for any injury to anyone, or for any illegal or improper use of the product, that
might result from failure to use this product in accordance with the instructions, cautions, warnings, or statement of
intended use published in this manual.
Welch Allyn, Acuity, AcuityLink, Propaq, Micropaq, Flexible Monitoring and FlexNet are registered trademarks of
Welch Allyn. ParamSet is a trademark of Welch Allyn.
C-LOCK and Nellcor are registered trademarks of Nellcor Puritan Bennett. Masimo and Signal IQ are registered
trademarks of Masimo Corporation.
Software in this product is copyrighted by Welch Allyn or its vendors. All rights are reserved. The software is protected
by United States of America copyright laws and international treaty provisions applicable worldwide. Under such laws,
the licensee is entitled to use the copy of the software incorporated with this instrument as intended in the operation
of the product in which it is embedded. The software may not be copied, decompiled, reverse-engineered,
disassembled or otherwise reduced to human-perceivable form. This is not a sale of the software or any copy of the
software; all right, title and ownership of the software remain with Welch Allyn or its vendors.
For information about any Welch Allyn product, call the nearest Welch Allyn representative:
USA 1 800 535 6663
+1 315 685 4560
1 800 289 2501, USA Technical Service
+1 503 530 7500, Technical Service
+1 503 526 4970, Fax Technical Service
Canada 1 800 561 8797
European Call Center +35 3 46 906 7790
Germany +49 7477 92 71 86
Latin America +1 305 669 9003
Singapore +65 6419 8100
United Kingdom +44 20 7365 6780
REF 104214 (CD)
Manual 80016708 Ver A, 2011-05
Welch Allyn Protocol, Inc.
8500 SW Creekside Place
Beaverton, Oregon 97008-7101 USA
www.welchallyn.com
Welch Allyn Ltd.
Navan Business Park
Dublin Road, Navan
County Meath, Republic of Ireland
Welch Allyn Acuity Central Monitoring System
Australia +61 2 9638 3000
1 800 074 793
China +86 216 327 9631
France +33 1 60 09 33 66
Japan +81 3 3219 0071
Netherlands +31 15 7505 000
South Africa +27 11 777 7555
Sweden +46 8 58 53 65 51