Welch Allyn Acuity Directions For Use Manual page 143

Directions for use
Table 8. Icons and messages that represent patient and monitor status
Patient/monitor
status icon
Too Many Hardwired
Monitors
Monitor Cannot
Communicate
Monitor Problem
Icon display Icon location on map
priority
Takes priority Location representing the
over low-level extra monitor.
alerts.
Take priority Locations representing
over low-level monitors that cannot
alerts communicate with Acuity
System.
Take priority Locations representing
over low-level problem monitors.
alerts.
Chapter 9 Status icons
Messages in Recommended action
hallway message
panels and at top
of Acuity Central
Station screen
[room #] Equipment Audible alert tone
continues until you
disconnect a monitor.
Disconnect a monitor not
in use, or wait until
another port becomes
available to connect the
extra monitor.
[room #] Equipment Close the alert window
and turn off or disconnect
the monitor.
Contact qualified service
personnel.
[room #] Equipment At Acuity Central
or more specific Station
message 1. Check yellow Virtual
Monitor for specific
alert message.
2. If there is an audible
tone, click Suspend.
3. If present, press one
of these buttons:
• DISMISS or
CONFIRM to dismiss
the alert message
• RESET to reset the
monitor
4. Correct the problem.
If the problem
persists, contact
qualified service
personnel.
At patient monitor
1. Check for specific
alert message.
2. If present, press one
of these buttons:
• Acknowledge to
acknowledge the
alert
• RESET to reset the
monitor
• DISABLE to disable
the alert
3. Correct the problem.
139