Welch Allyn Acuity Directions For Use Manual page 116

112 Chapter 6 Review or print patient data
Adjust the OxyCRG display and locate alarms
.
To adjust the time period shown in the display area of the window
1. Under Time Span, click a button.
Time markers show along the top of the graphs area.
2. Click on the time line to display data from a different time period.
Along the time line, patient alarms are red.
3. Scroll the display.
Click
Click
To select and adjust the CO
1. Under Wave, check up to three boxes to display the corresponding wave or trend
graphs.
2. Click Scales, and then make a selection.
To locate and display alarm information
1. Click a red (alarm) area along a trend graph or wave.
The blue cursor bar shows vital-sign values along each trend graph or wave.
2. Click
or to scroll the display forward or backward.
or to page the display forward or backward.
waveform and the trend graphs
2
or to jump to the next or previous alarm.
Welch Allyn Acuity Central Monitoring System
Time marker
HR and SpO lines are
2
connected trend values.
Red lines indicate alarms.
Perfusion Index (PI). For
information, refer to
Masimo Corporation
literature.