Download Print this page

Select Sampling Frequency - Digigram EtherSound ES881v2 User Manual

Ethernet audio bridges

Table of Contents

Available languages

EtherSound ES881v2, ES1241v2 & ES16161v2

Ethernet Audio Bridges

Select sampling frequency

This jumper allows for modification of the ES881v2, ES1241v2, and ES16161v2 sampling frequency. The

default value is preset to 48 kHz. It can be set to 44.1 kHz. Note that this setting is effective only if the device

is the Clock Source of the EtherSound network. In all other cases the sampling frequency is determined by the

incoming EtherSound stream (synchronized on the Clock Source clock). Modifications on devices other than

the Clock Source will be ignored.

Table of Contents

Table of Contents

Do you have a question about the EtherSound ES881v2 and is the answer not in the manual?

Ethersound es16161v2 Ethersound es1241v2