Table of Contents
Advertisement
6. USALS
If you want to set USALS (Universal
Satellite Automatic Location System),
you must enter your longitude value
and you must set USALS menu
to "ON" and enter position value at
LNB menu in the TP configuration.
The DiSEqC code value will be
automatically sended to Motor. If you
also set DiSEqC 1.2 to "ON", the
USALS function will not work.
7. Select Search Channels on the TP
Configuration press OK, all the
available TP will be searched
automatically.
8. Move to desired TP with Channel
▼ ▲ on the RCU. If there are no
transponder data which you want,
move to Add New Transponder and
press OK button.
9. Select the desired satellite. And
input correct values of Frequency,
Polarization and Symbol Rate. Select
the Polarization value as Hor or Ver.
If you did not know accurate
polarization value select Auto.
15
Advertisement
Table of Contents
