Table of Contents
Advertisement
TV Standard
Except for few, most countries are using
PAL system for TV signal, accordingly set
TV Standard as PAL. To be more flexible
for NTSC or PAL signal from different
satellites, select MULTI for automatic signal
conversion. Then press OK button for its
confirmation.
RF mode
If the satellite receiver is connected to the
TV with a RF cable, you have to set the RF
mode, which is dependent on the country
where the satellite is being used.
1. Select the Channel No(Select a channel
of RF output of TV set that you are using).
2. Select the accurate RF mode of country
the satellite receiver is used.
3. Select RF pattern with on and off. It will
help you correct video quality with adjusting
TV frequency.
Subtitle
Set the Subtitle language and mode.
OSD & Info Bar
The color mode for OSD display menu
screen is available from 4 different Color
Set. By changing the
Color set,
the
changes in color can be easily noticed with
your choice. Also you cab set the OSD and
Info Bar appearance time and transparency.
21
Advertisement
Table of Contents
