Activating Ultrasonic Power - Emerson DCX S Operating Manual

7.1

Activating Ultrasonic Power

On DCX S Power Supply, ultrasonic power activates after receiving an External Start signal
at the corresponding user I/O.
NOTICE
Ultrasonic power remains On until you turn off the power supply or the External Start
signal. For default user I/O assignment see
configuring the power supply user I/O refer to your DCX S Power Supply Web Page
Interface Instruction Manual (100-412-187).
90
DCX S Power Supply must be in ready mode before External Start.
5.3.6 User I/O Connections
100-412-183 REV. 13
For information on