Kenwood NX-720 Service Manual page 49

Item
Panel tuning mode
10. Single 1) Adj item: [TONE]
Tone Adjust: [..]
Deviation *4 PTT: ON
Press [ ] key to
[Wide 4k] store the adjust-
ment value.
[Wide 5k] 1) Adj item: [TONE]
Adjust: [...]
PTT: ON
Press [ ] key to
store the adjust-
ment value.
11. MSK 1) Adj item: [MSK]
Deviation *4 Adjust: [.]
Deviation meter
[Narrow] LPF: 15kHz
HPF: OFF
PTT: ON
Press [ ] key to
store the adjust-
ment value.
[Wide 4k] 1) Adj item: [MSK]
Adjust: [..]
PTT: ON
Press [ ] key to
store the adjust-
ment value.
[Wide 5k] 1) Adj item: [MSK]
Adjust: [...]
PTT: ON
Press [ ] key to
store the adjust-
ment value.
12. CW ID 1) Adj item: [CWID]
Deviation *4 Adjust: []
Deviation meter
[Very Nar- LPF: 15kHz
row] HPF: OFF
PTT: ON
Press [ ] key to
store the adjust-
ment value.
*4: Refer to the "Necessary Deviation adjustment item for each signaling and mode" table on page 50.
ADJUSTMENT
Condition
PC test mode
equipment
1) Adj item: [Single Deviation
Tone Deviation meter
(Analog Wide 4k] Oscillo-
PTT: Press scope
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
1) Adj item: [Single
Tone Deviation
(Analog Wide 5k]
PTT: Press
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
1) Adj item: [MSK Deviation
Deviation (Analog meter
Narrow] Oscillo-
Deviation meter scope
LPF: 15kHz
HPF: OFF
PTT: Press
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
1) Adj item: [MSK
Deviation (Analog
Wide 4k)]
PTT: Press
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
1) Adj item: [MSK
Deviation (Analog
Wide 5k)]
PTT: Press
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
1) Adj item: [CW ID
Deviation (NXDN
Very Narrow)]
Deviation meter
LPF: 15kHz
HPF: OFF
PTT: Press
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
NX-720(G)/720
Measurement
Test-
Unit Terminal Unit
ANT
ANT
Adjustment
Parts Method
Panel Write the value 2.40kHz±0.05kHz
tuning 513 (Reference
mode]
value)
[ ],
[ ]
[PC test
mode]
[ ],
[ ]
Write the value 3.00kHz±0.05kHz
513 (Reference
value)
Panel Write the value 1.50kHz±0.05kHz
tuning 513 (Reference
mode] value)
[ ],
[ ]
[PC test
mode]
[ ],
[ ]
Write the value 2.40kHz±0.05kHz
513 (Reference
value)
Write the value 3.00kHz±0.05kHz
513 (Reference
value)
Write the value 1.00kHz±0.10kHz
376 (Reference
value)
Specifi cations/
Remarks
49