Kenwood NX-720 Service Manual page 47

Item
Panel tuning mode
6. QT 1) Adj item: [QT]
Deviation *4 Adjust: [..]
PTT: ON
[Wide 4k] Press [ ] key to
store the adjust-
ment value.
[Wide 5k] 1) Adj item: [QT]
Adjust: [...]
PTT: ON
Press [ ] key to
store the adjust-
ment value.
7. DQT 1) Adj item: [DQT]
Deviation Adjust: [.]
*4 Deviation meter
LPF: 3kHz
[Narrow] HPF: OFF
PTT: ON
Press [ ] key to
store the adjust-
ment value.
[Wide 4k] 1) Adj item: [DQT]
Adjust: [..]
PTT: ON
Press [ ] key to
store the adjust-
ment value.
[Wide 5k] 1) Adj item: [DQT]
Adjust: [...]
PTT: ON
Press [ ] key to
store the adjust-
ment value.
ADJUSTMENT
Condition
PC test mode
equipment
1) Adj item: [QT Deviation
Deviation (Analog meter
Wide 4k)] Oscillo-
PTT: Press scope
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
1) Adj item: [QT
Deviation (Analog
Wide 5k)]
PTT: Press
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
1) Adj item: [DQT Deviation
Deviation (Analog meter
Narrow)] Oscillo-
Deviation meter scope
LPF: 3kHz
HPF: OFF
PTT: Press
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
1) Adj item: [DQT
Deviation (Analog
Wide 4k)]
PTT: Press
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
1) Adj item: [DQT
Deviation (Analog
Wide 5k)]
PTT: Press
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
NX-720(G)/720
Measurement
Test-
Unit Terminal Unit
ANT
ANT
Adjustment
Parts Method
[Panel Write the value 0.6kHz±0.05kHz
tuning 513 (Reference
mode]
value)
[ ],
[ ]
[PC test
mode]
[ ],
[ ]
Write the value 0.75kHz±0.05kHz
513 (Reference
value)
[Panel Write the value 0.35kHz±0.05kHz
tuning
430 (Reference
mode]
value)
[ ],
[ ]
[PC test
mode]
[ ],
[ ]
Write the value 0.6kHz±0.05kHz
430 (Reference
value)
Write the value 0.75kHz±0.05kHz
430 (Reference
value)
Specifi cations/
Remarks
47