I User Set Mode - Icom IC-F9011B Instruction Manual

Hide thumbs Also See for IC-F9011B:

Table of Contents

User set mode

User set mode is accessed at power ON and allows you to

set seldom-changed settings. In this case you can "cus-

tomize" the transceiver operation to suit your preferences and

operating style.

Entering the user set mode:

While pushing and holding [P1]

and [P2], rotate [VOL] to turn

the power ON. Then, push and

hold [<] to enter user set

mode.

Push [<] several times to

select the appropriate item.

Then, push [Up] or [Down] to

set the desired level/condition.

• Available set mode functions are

Backlight, LCD Contrast, Beep,

Beep Level, SQL Level, AF Min

Level, Mic Gain, Vox Gain, Vox

Delay and Battery Voltage.

[VOL]

[P1]/[P2]

[<]

[Up]

[Down]

[<]

Rotate [VOL] to turn the power

OFF to exit set mode.

User set mode is also available via

a programmable key. Please refer

to p. 10 [User Set Mode] section.

BASIC OPERATION

[VOL]

3 3 3 3

Table of Contents

Ic-f9011s Ic-f9011t