Advertisement
_____________________________________________________________________________
_________
5. If you click on Status, the following window will appear:
In this window, the user can view the following:
-
iDEN Band: Will display the center frequencies of the 800 and 900 MHz
spectrums on the downlink and uplink respectively.
-
Power & Gain: Will display the repeater input, gain and output power on the
downlink and uplink.
-
Alarm: Will display five alarms with three different status conditions (Normal,
Soft Fail or Hard Fail).
-
Message Board: Will show up to recent 20 log messages (Alarms &
Heartbeats).
-
Modem: Will display the status of the mode (e.g. Disabled, Not Connected or
Connected)
-
Installation: Will display repeater's installation status (Not Installed or
Installed).
-
Repeater Info: Will display repeater's serial number, modem ESN and MDN.
-
Repeater Location: Will display the address where the repeater is installed
Advanced RF Technologies, Inc. Proprietary Document
2607 Colorado Blvd. Los Angeles, CA 90041
TEL: (323) 254-8131 FAX: (323) 254-4928
www.adrftech.com
3
Advertisement
