VTech wf6972 User Manual page 46

Answering system operation
Setting answering system
Set new message tone
This feature programs the system to beep every 10 seconds to alert you of new
messages. The beep will stop when all new messages have been reviewed.
• Press the softkey MENU when in idle mode.
• Press the softkey
SELECT
• Press the softkey
softkey SELECT
• Use the softkey
SET
Set security code
A four-digit security code is required to access the answering system from any
touch tone telephone. The factory default code is 4321.
• Press the softkey MENU in idle mode.
• Press the softkey
SELECT
• Press the softkey
SELECT
• Press the softkey CHANGE to change the digit. Press the softkey NEXT to
move the cursor to the next digit.
• Press the softkey SET
tone.
44
twice to reach ANSWERING SYSTEM. Press the softkey
once to reach NEW MESSAGE TONE, and press the
or to toggle between ON and OFF. Press the softkey
twice to reach ANSWERING SYSTEM. Press the softkey
twice to reach SECURITY CODE, and press the softkey
www.vtechphones.com