VTech wf6972 User Manual page 67

Handset applications menu
In this menu, you have access to the data transfered from your PC applications
software. In order to access the data in this menu successfully, you must setup
the WiFi connection successfully (refer to the section WiFi setup on page ), with
the PC applications software installed and open in your PC. (refer to the section
VTech PC applications software on page
To enter the handset applications menu:
• Press MENU/SEL in idle mode to display menu.
• Use the UP or DOWN NavKey
press MENU/SEL
PC data transfer
You can activate the PC data transfer mode by selecting this choice in the
Applications menu. In order to transfer data from PC, operations must be initiated
by from the VTech PC applications software with the handset in PC data transfer
mode. For operations of the software, refer to the section VTech PC applications
software on page .
• When in the Applications menu, use the UP or DOWN NavKey
reach PC data transfer, and press MENU/SEL to choose. The screen should
display a message that the data transfer mode is enabled, and you can start
the operation in VTech PC applications software.
• Press OFF anytime if you wish to go to the Applications menu with the
WiFi connection continues. Press and hold OFF if you wish to end the WiFi
connection.
).
or to reach the Applications menu, and
www.vtechphones.com
PC Data Transfer
You are now
connected to
VTech PC
Application. Data
transfer mode is
now enabled.
or to
65