ASSEMBLY
STEP5: Assemble Computer Console
A.
Rotate the console until it stops as shown in diagram below .
B.
Tighten the screw (807) of the console connect tube (213) for right and left side .
Console connect tube (213) will be adjust for the next steps of assembly .
C.
Attach the Handle Bar Cover ‐ LR (208) to the underside of the console and the inside
of the left upright (301), Secure with four M4×15mm screw (802). And secure with
two M4×15mm screw (802) between the Handle Bar Cover ‐ LR (208) outside and
the console housing ‐upper.
D.
Attach the Handle Bar Cover ‐ LL (207) to the top of the console and the outside of
the Upright ‐ Left (301).And secure with four M4×15mm screw (802).
E.
Repeat the above process for the right hand side cover (209) and cover (210) as
shown in diagram.
5.45 MOTORIZED TREADMILL
802
X20
22