Smooth Fitness 5.45 Owner's Manual page 20

19 5.45 MOTORIZED TREADMILL
ASSEMBLY
STEP 2: Assemble Upright Frame
NOTE : Make sure all wires are recessed into the frame , DO NOT trap or pinch
(Hand tight bolts until last step )
A. Raise the left and right uprights (301) .
B. Secure the left upright (301) with two 8x18 mm Allen bolts (810) and two
Ø8 washer (812) through the front side of the base frame . hand tighten .
C. Secure the right upright (301) with two 8x18 mm Allen bolts (810) and two
Ø8 washer (812) through the front side of the base frame . hand tighten .
D. Insert one M 8x52 mm Allen bolt (811) and one Ø8 washer (812) through
the side of the base frame and the left upright , hand tighten .
E. Insert one M 8x52 mm Allen bolt (811) and one Ø8 washer (812) through
the side of the base frame and the right upright , hand tighten .
F.
Tighten all Allen bolts with Allen wrench C (Provided with hardware).
301
812
810
811
812
811 X2
810 X4
812 X6