Safety
1.
The handling of the system assumes knowledge of the instruction manual.
1.1
The following symbols are used in the instruction manual.
i
Measure
1.2
Connect the power supply in accordance with the safety regulations for electrical equipment.
CAUTION
> Danger of injury
> Damage to or destruction of the light source
Do not look directly into the light source
> Danger of injury, damage to the eyes or skin
Let the light source cool off for a few minutes before changing the lamp.
> Risk of burns by the still hot lamp
Make sure that there is always proper ventilation and the rear side and the ventilation slots are not covered.
> Risk of fire by overheating
> Damage to or destruction of the light source
ELTROTEC Endolight FOT LED
Safety
Symbols Used
Indicates a hazardous situation which, if not avoided, may result in minor or moderate
CAUTION
injuries.
Indicates a situation which, if not avoided, may lead to property damage.
NOTICE
Indicates a user action.
Indicates a user tip.
Indicates a hardware or a button/menu in the software.
Warnings
Page 5
Need help?
Do you have a question about the ELTROTEC Endolight FOT LED and is the answer not in the manual?