Preventative Maintenance Instructions - Dexter Laundry B-Series Operator's Manual

PREVENTIVE MAINTENANCE INSTRUCTIONS
DAILY
1. Clean the lint screen. Use a soft brush if necessary.
2. Check the lint screen for tears. Replace if necessary.
3. Clean lint from the lint screen compartment.
MONTHLY
1. Remove lint accumulation from the end bells of the motors.
2. Remove lint accumulation from front control area.
3. Remove lint and dirt accumulation from the top of the dryer and all areas above, below, and around the
burners and burner housing. Failure to keep this portion of the dryer clean can lead to a build-up of lint
creating a fire hazard.
4. Place a few drops of light oil on the clothes door hinge.
QUARTERLY
1. Check the belts for looseness, wear, or fraying.
2. Inspect the gasket of the door glass for excessive wear.
3. Check tightness of all fasteners holding parts to support channel.
4. Check tightness of all set screws.
5. Inspect the impeller for tightness of the blades to hub.
6. Check the tightness of the tumbler shaft retaining bolt.
7. Remove the air flow switch assembly and check the tumbler thru-bolts for tightness.
8. Remove lint accumulation from the primary air ports in the burners.
SEMI-ANNUALLY
1. Remove and clean the main burners.
2. Remove all orifices and examine for dirt and hole obstruction.
3. Remove all lint accumulation. Remove the front panel and the lint screen housing and remove lint
accumulation.
ANNUALLY
1. Check and remove any lint accumulation from the exhaust system.
SERVICE PARTS
DRIVE BELT, TUMBLER
LINT SCREEN FILTER
For service and parts information, contact your local Dexter agent. If a Dexter agent is not available, contact
Dexter Laundry, Inc. directly as listed below:
Mailing Address:
Website: www.dexter.com
8514-279-001 REV B PAGE 24
PART NUMBER__________
T-50
9040-076-004
9822-026-001
2211 West Grimes Avenue
Fairfield, IA 52556
USA
Phone: 1-800-524-2954