Advertisement
Figure 30
18
Checking the Machine for
Grease
Parts needed for this procedure:
Number 2 general-purpose lithium-base or
1 tube
molybdenum-base grease. (Purchase separately.)
Procedure
Before you use the machine, check the machine for grease;
refer to Lubrication in the Operator's Manual.
19
Removing the Shipping Straps
No Parts Required
Procedure
Note: This procedure is only for machines with a MyRide
suspension system.
WARNING
The springs are compressed by the shipping straps.
When the straps are cut, the seat will raise up
quickly by approximately 8.9 cm (3-1/2 inches).
Note: Ensure the straps are removed before operating the
machine.
13
g030083
Figure 31
™
Advertisement
