Setting Up And Installing The System; Ambient Conditions - vacuubrand BVC basic Instructions For Use Manual

Setting up and installing the system

• Comply with maximum permissible pressures and
NOTICE Provide a firm level platform for the equipment. Ensure a
stable position of the equipment. Ensure that hose con-
nections are mechanically stable.
Connect the BVC basic and BVC basic G to a suitable
vacuum supply (vacuum pump, local vacuum network
VACUU•LAN
The diameter of the an outlet tubing should be at the least
as large as the diameter of the pump connections.
Comply with all applicable and relevant safety require-
ments (regulations and guidelines), implement the re-
quired actions and adopt suitable safety measures.

Ambient conditions

+ P ay attention to the permissible maximum ambient
To the best of our knowledge the equipment is in com-
NOTICE
pliance with the requirements of the applicable EC-direc-
tives and harmonized standards (see "Declaration of con-
formity") with regard to design, type and model, especially
directive DIN EN 61010-1. This directive gives, in detail,
conditions, under which the equipment can be operated
safely (see also IP degree of protection).
page 7 of 35
pressure differences; see section "Technical data". Do
not operate the pumping unit with overpressure at the
inlet or outlet.
).
®
temperatures (see "Technical data").
Ensure that hose con-