Performing Resistance Measurement And Continuity Test - Keysight U1211A Quick Start Manual

Performing Resistance Measurement and
Continuity Test
1 Set the rotary switch to Ω.
2 Connect the red and black test leads to input
3 Probe the test points (by shunting the resistor)
4 To perform continuity test, press Shift once.
Keysight U1211A, U1212A, and U1213A Quick Start Guide
terminals Ω (red) and COM (black)
respectively.
and read the display.
The buzzer will sound when the resistance is
below 10.0 Ω.
15