Functional description
3 Functional description
3.1 General description
The product Slido Classic 80-B eDrive is an electric drive for sliding doors. The motor control device Slido Classic
80-B eDrive
drives a 24V DC motor Slido Classic 80-B eDrive
/STR
it is connected by a timing belt.
Hint
This document describes the functionality of the motor control device Slido Classic 80-B eDrive .
Instruction manuals for the installation of the mechanical part of the sliding door are available in
separate documents.
The control device is designed to fit in a standard flush box, according to DIN 49073. The control device
disappears into the flush box, including its electrical connections. For operation a removable switch is provided,
which fits into commercial available switch ranges with standard dimensions of 55mm.
The control device is powered by an external power supply unit. The PSU supplies 24V DC and is connected to
terminals 1 and 2. It can be placed in a flush box next to the control device. A distant mounting is also possible.
For information on the wiring, refer to chapter Fehler! Verweisquelle konnte nicht gefunden werden..
For electrical connections, screw terminals are provided. These are grouped by their function:
Power supply (Terminals 1 and 2), Control inputs (Terminals 1, 15, 21 and 29), Motor (Terminals MA and MB)
and Encoder (Terminals 1, 82, 85 and 86).
The encoder of the motor Slido Classic 80-B eDrive/MT has to be connected, to ensure proper operation.
The control device provides a potentiometer P1, to set the time the door stays open (automatic mode only). The
operation mode is selected by a DIP switch.
To perform the initial operation or to apply new settings, the reset key is used.
Hint
For further information on configuration and initial operation, refer to chapter Fehler!
Verweisquelle konnte nicht gefunden werden..
LEDs for status
information
+
-
Potentiometer P1
Slido Classic 80-B eDrive Version 1.0
MT. The motor drives a sliding door, to which
/
Reset key
Configuration Switch
Instruction Manual
3
7/26