Electrical Connection - Hafele Classic 80-B eDrive Instruction Manual

5
Mounting and electrical connection

5.2 Electrical connection

Carrying out electrical connections
 Disconnect main power and protect against power up.
 For safety instructions refer to chapter 2.
 Connect power supply to terminals 1 and 2.
Terminal 2: 24V DC (+)
Terminal 1: Ground (-)
 Connect motor to terminals MA and MB.
Polarity determines direction of operation.
 Connect encoder.
Terminals 82, 86, 85 and 1
 Connect on-site actuators (optional)
Terminals 1, 15, 21 and 29
12/26 Instruction Manual
C A U T I O N
Wrong installation
Damage of control device.
 Observe polarity of connections.
 Inputs (Terminals 1, 15, 21, 29) are potential free.
Figure 3
Control device inputs
Motor
Encoder
b a
82 86 85 1
2 1 29
1 15 21
On-site
control
inputs
Slido Classic 80-B eDrive-Version 1.10n