2
Safety
2 Safety
2.1 Requirements for operation
Hint
Read the instruction manual before performing the initial operation
2.1.1 Environmental conditions
The 24 V motor control device for sliding doors is designed for standard wall jacks in dry interior.
2.2 Proper use
This product is a motor control device for the sliding door
manufacturer's specifications must be respected, in especially maximum and minimum dimensions and maximum
weight of the door leaf.
Any other use of this product is considered inappropriate use.
It is not guaranteed, that this product will work in combination with fittings, motors or other electronic devices of
other manufacturers.
2.3 Behavior in case of an error
In case of an error, the device must be shut down and the manufacturer must be informed.
Shut down
Do not operate device.
Disconnect device from power supply.
Inform the manufacturer.
6/26
Instruction Manual
D A N G E R
Electric Shock
Danger to life and health due to electric shock.
Electrical connections have to be installed by approved
personnel only
Switch off power before carrying out work and secure
power against being switched on.
Observe relevant safety instructions.
Slido Classic 80-B eDrive
of the manufacturer. The
Slido Classic 80-B eDrive-Version 1.10n