6
Initial operation
6.3 Behavior after a power cut
When the main power is cut off, the control device will not work. The control device can be operated without an
initial operation, when main power is restored (Provided that the control device has already been put into
operation).
Bring control device back into normal operation
Restore main power.
Control device after power cut:
Red LED blinks continuously twice with a short break of 1.5 sec.
Execute desired action:
Press OPEN to open the door, press CLOSE to close the door.
First movement will start with reduced speed.
Normal operation is restored.
Hint
After a power cut, no further initial operation is necessary. The operation parameters are saved
permanently during initial operation.
20/26
Instruction Manual
...
Slido Classic 80-B eDrive-Version 1.10n