11-B
WPA/WPA2
1
Touch the right FUNCTION button.
2
Enter the network key, then touch the left
FUNCTION button.
•
Enter upper and lower case letters of the alphabet
correctly. Letters are case sensitive.
3
Make sure that the network key is correct, then
touch the OK button.
Go to
.
12
When the completion screen appears, touch the OK
button.
The Setup menu screen returns. Touch the HOME
button.
Specifying the Machine's IP Address (IPv4 only)
Disable
Action
The machine's IP Address can be specified by the following procedure.
1
With Setup displayed on the HOME screen, touch the right FUNCTION button.
2
Select Device settings, then touch the OK button.
3
Select LAN settings, then touch the OK button.
4
Select Other settings, then touch the OK button.
5
Select IPv4/IPv6 setting, then touch the OK button.
6
Select IPv4, then touch the OK button.
7
Select Yes, then touch the OK button.
8
Select Manual setup, then touch the OK button.
•
Follow the on-screen instructions to proceed with settings.
•
When the setup is complete, touch the HOME button.