Specifying The Machine's Ip Address (Ipv4 Only) - Canon PIXMA MX882 Network Setup Manual

11-B WPA/WPA2
1
Press the OK button.
2
Enter the network key, then press the left
FUNCTION button.
• Enter upper and lower case letters of the alphabet
correctly. Letters are case sensitive.
3
Make sure that the network key is correct, then
press the left FUNCTION button.
Go to .
12
When the completion screen appears, press the OK
button.

Specifying the Machine's IP Address (IPv4 only)

Disable
Action
The machine's IP Address can be specified by the following procedure.
1
Press the Setup button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Other settings, then press the OK button.
5
Select IPv4/IPv6 setting, then press the OK button.
6
Select IPv4, then press the OK button.
7
Select Yes, then press the OK button.
8
Select Manual setup, then press the OK button.
• Follow the on-screen instructions to proceed with settings.