Specifying The Machine's Ip Address (Ipv4 Only) - Canon PIXMA MG5220 Network Setup Manual

11-B
WPA/WPA2
1
Press the right FUNCTION button.
2
Enter the network key, then press the left
FUNCTION button.
• Enter upper and lower case letters of the alphabet
correctly. Letters are case sensitive.
3
Make sure that the network key is correct, then
press the OK button.
Go to
.
12
When the completion screen appears, press the OK
button.
The Setup menu screen returns. Press the HOME
button.

Specifying the Machine's IP Address (IPv4 only)

Disable
Action
The machine's IP Address can be specified by the following procedure.
1
With Setup displayed on the HOME screen, press the right FUNCTION button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Other settings, then press the OK button.
5
Select IPv4/IPv6 setting, then press the OK button.
6
Select IPv4, then press the OK button.
7
Select Yes, then press the OK button.
8
Select Manual setup, then press the OK button.
• Follow the on-screen instructions to proceed with settings.
• When the setup is complete, press the HOME button.