Configuring Non-Swm Receivers - KVH Industries TracVision HD7 Installation Manual

B

Configuring Non-SWM Receivers

Follow the steps below to set up the TracVision
system to use the customer's selected satellite TV
service and configure non-SWM receivers and
DVRs.
Select the Satellite TV Service on the ACU
Follow the steps below to set up the TracVision
system for the customer's satellite TV service.
NOTE: If you don't have access to the web interface,
you can change the service setting at the ACU's front
panel. Go to Advanced Options > Change Sat Service.
a. Using a computer connected to the same
network as the HD7, open a web browser and
enter the ACU's IP address.
b. At the Login window, enter the following
user name and password (see
Username: admin
Password: password
c. At the Settings page, click Advanced Settings
(see Figure 42).
d. Select the desired service provider. Then click
Change Service.
26
Figure 41 Web Interface Login Screen
Figure 42 ACU Web Interface Advanced Settings Page
Figure 41):
Appendix