Table Of Contents - KVH Industries TracVision HD7 Installation Manual

TracVision HD7 Installation Guide
These instructions explain how to install the TracVision
the alternate, 35" (90 cm) dome) on a vessel. Complete instructions on how to use the system are
provided in the User's Guide.
Installation Steps
1. Inspect Parts and Get Tools ................. 3
2. Plan the Antenna Installation .............. 4
3. Plan the ACU Installation .................... 5
4. Prepare the Antenna Site...................... 6
5. Remove the Hatch and Radome.......... 7
6. Prepare the RF Cable(s) ........................ 8
7. Wire the Antenna .................................. 9
8. Mount the Antenna ............................. 10
9. Remove the Shipping Restraints ....... 11
10. Mount the ACU ................................... 12
Appendices
A. Wiring Non-SWM Receivers.............. 23
B. Configuring Non-SWM Receivers .... 26
Who Should Install the System?
To ensure a safe and effective installation, KVH recommends that a KVH-authorized marine
technician install the TracVision antenna. KVH-authorized technicians have the tools and
electronics expertise necessary to install the system. To find a technician near you, visit
www.kvh.com/wheretogetservice.
Technical Support
If you need technical assistance, please contact KVH Technical Support:
Phone: +1 401 847-3327
Email: support@kvh.com
(Mon.-Fri., 9 am-6 pm Eastern)
(Sat., 9 am-2 pm Eastern)
KVH, TracVision, and the unique light-colored dome with dark contrasting baseplate are registered trademarks of KVH Industries, Inc.
All other trademarks are property of their respective companies. The information in this document is subject to change without notice.
No company shall be liable for errors contained herein. Protected by U.S. patent #8,497,810 and 9,281,561 B2;
additional patents pending. © 2009-2018 KVH Industries, Inc., All rights reserved. 54-0685 Rev. E
®
HD7 satellite TV antenna system (with
11. Connect the Antenna Cables.............. 13
12. Connect Power ..................................... 14
13. Connect SWM Receivers/DVRs........ 16
14. Configure SWM Receivers/DVRs..... 17
15. Connect to An Onboard Network..... 18
16. Access the Web Interface .................... 19
17. Change Network Settings................... 20
18. Update the System Software.............. 21
19. Educate the Customer......................... 22
C. ACU Menu Structure .......................... 28
1