TJ
GENERAL INFORMATION (Continued)
THREADED HOLE REPAIR
Most stripped threaded holes can be repaired using
a Helicoil . Follow the manufactures recommenda-
tions for application and repair procedures.
METRIC SYSTEM
The metric system is based on quantities of one,
ten, one hundred, one thousand and one million (Fig.
6).
Fig. 6 Metric Prefixes
CONVERSION FORMULAS AND EQUIVALENT VALUES
The following chart will assist in converting metric
units to equivalent English and SAE units, or vice
versa.
Refer to the Conversion Chart to convert torque
values listed in metric Newton- meters (N·m). Also,
use the chart to convert between millimeters (mm)
and inches (in.)
INTRODUCTION
7