2.4. ADB driver settings
Here we will explain how to connect the BT-2000 to the app development computer, and set the
ADB driver.
When using Windows8 OS or later, it is required to operate by test mode to install ADB driver.
When using Windows7 OS or before, proceed to "2.4.2 When using Windows7 OS or before".
2.4.1. When using Windows8 OS or later
2.4.1.1. Operate by test mode
1) Run the command prompt as administrator, and run below command.
> bcdedit -set testsigning on
※When below error occur by running above command, please refer to
"2.4.1.2 When failing test mode command".
2) Select 「Setting」→「Change PC Setting」 from the charm.
3) Select 「Update and recovery」→「Recovery」→「Restart now」.
Select→
4) Select 「Trouble shoot」→「Advanced options」 from the menu.
MOVERIO Pro Developer's Guide (Rev.1.4)
Select→
12
Select→