Table of Contents
Advertisement
8.3.2. Using BLE
To test the BLE function for the BT-2000, sample BLEBeacon and PXP/FMP applications have
been preinstalled. Refer to these sample applications when developing a BLE application for the
user.
The following explains how to use the sample applications.
8.3.2.1. Using the BLEBeacon sample application
Select the BLEBeacon icon from the app list.
BLE turns on automatically when the app starts, and the BLE icon is displayed in the notification
area.
Item
Scan Start
Scan Stop
Address
Device Name(m/n)
Distance
Note 2) Determining distance for the BLEBeacon
You need to perform distance determination for the BT-2000 and the Beacon in the app.
Distance determination is calculated based on the Measured Power included in the Advertise
data by the BLEBeacon app.
Since Measured Power support varies depending on the Beacon manufacturer, you will need to
MOVERIO Pro Developer's Guide (Rev.1.4)
Figure 8-3 BLEBeacon icon
Figure 8-4 BLEBeacon app screen
Table 8-5 BLEBeacon app screen composition
Explanation
Starts scanning for the BLE Beacon.
Stops scanning for the BLE Beacon.
Displays the Bluetooth Device Address.
Displays the Device Name and the Major/Minor numbers.
* Depends on the Advertise data configuration from the Beacon.
Displays the determined distance and RSSI value. Note 2)
126
Advertisement
Table of Contents
