Application Interface List - Epson Moverio Pro BT-2000 Developer's Manual

8.6. Application interface list

Tables 8-9, 8-10, and 8-11 provide a list of application interfaces.
Table 8-9 android.bluetooth.BluetoothLeAdapterManager for application interface list
NO. Function name
1 getInstance
2 isEnable
3 enable
4 disable
5 startScan
6 stopScan
7 getDeviceName
8 getBdAddress
9 connect
10 connectCancel
11 disconnect
12 setAuthType
13 notifyInputPasskey
14 setGapCallback
15 discPriSrv(char)
16 discChar
17 discCharDesc
18 readGatt
19 readUuidGatt
20 writeWithoutRspGatt
21 writeGatt
22 confirmation
23 setGattCallback
MOVERIO Pro Developer's Guide (Rev.1.4)
Acquires instance.
Acquires enable/disable status for BLE.
Enables BLE.
Disables BLE.
Starts scanning for the BLE.
Stops scanning for the BLE.
Acquires the local device name.
Acquires the local BD device.
Starts connecting to the BLE device.
Cancels connecting to the BLE device.
Disconnects from the BLE device.
Sets the authentication type.
Sets the Pad Key entry.
Registers a callback for the GAP function.
Searches for the Primary Service for the BLE device.
Searches for the Characteristic for the BLE device.
Searches for the Characteristic Description for the BLE device.
Acquires the Characteristic Value and the Characteristic
Descriptor.
Acquires the Characteristic Value for the set UUID.
Writes the Characteristic Value (without a response)
Writes the Characteristic Value and the Characteristic
Descriptor.
Executes an Indication response.
Registers a callback for the GAP function.
133
Function summary